CurveSize1

Property of: Beam

Value Type: float

Description:

Determines, along with Beam/Attachment0 the position of the first control point in the Beam’s Bézier curve.

The position of this point can be determined by the following equation:

local controlPoint2 = Beam.Attachment1.WorldPosition - (Beam.Attachment1.CFrame.rightVector * Beam.CurveSize1)

Beam Curvature

Beams are configured to use a cubic Bézier curve. This means they are not constrained to straight lines, and the curve of the beam can be modified by changing Beam/CurveSize0, CurveSize1 and the orientation of the beam’s Attachments.

Cubic Bézier curves are formed of four control points. They are determined as follows:

P0: The start of the beam, the position of Beam/Attachment0
P1: Beam/CurveSize0 studs away from Beam/Attachment0, in Beam/Attachment0’s positive X direction.
P2: CurveSize1 studs away from Beam/Attachment1, in Beam/Attachment1’s negative X direction.
P3: The end of the beam, the position of Beam/Attachment1

The beam starts at P0, goes towards P1, and arrives at P3, from the direction of P2. The beam will not necessarily pass through P1 and P2.

See the images below for a visual demonstration.

enter image description here

Code Samples

Creating a Beam From Scratch

This code sample demonstrates how a Beam effect can be created from scratch by creating a Beam, setting all of its properties and configuring it’s Attachments. See below for an image of the final result:

enter image description here

			
				Creating a Beam From Scratch

				Expected Output
			
				Expand
				
			-- create attachments
local att0 = Instance.new("Attachment")
local att1 = Instance.new("Attachment")

-- parent to terrain (can be part instead)
att0.Parent = workspace.Terrain
att1.Parent = workspace.Terrain

-- position attachments
att0.Position = Vector3.new(0, 10, 0)
att1.Position = Vector3.new(0, 10, 10)

-- create beam
local beam = Instance.new("Beam")
beam.Attachment0 = att0
beam.Attachment1 = att1 

-- appearance properties
beam.Color = ColorSequence.new({ -- a color sequence shifting from white to blue
		ColorSequenceKeypoint.new(0, Color3.fromRGB(255, 255, 255)),
		ColorSequenceKeypoint.new(1, Color3.fromRGB(0, 255, 255))
	}
)
beam.LightEmission = 1 -- use additive blending
beam.LightInfluence = 0 -- beam not influenced by light
beam.Texture = "rbxasset://textures/particles/sparkles_main.dds" -- a built in sparkle texture
beam.TextureMode = Enum.TextureMode.Wrap -- wrap so length can be set by TextureLength
beam.TextureLength = 1 -- repeating texture is 1 stud long 
beam.TextureSpeed = 1 -- slow texture speed
beam.Transparency = NumberSequence.new({ -- beam fades out at the end
		NumberSequenceKeypoint.new(0, 0),
		NumberSequenceKeypoint.new(0.8, 0),
		NumberSequenceKeypoint.new(1, 1)
	}
)
beam.ZOffset = 0 -- render at the position of the beam without offset 

-- shape properties
beam.CurveSize0 = 2 -- create a curved beam
beam.CurveSize1 = -2 -- create a curved beam
beam.FaceCamera = true -- beam is visible from every angle 
beam.Segments = 10 -- default curve resolution  
beam.Width0 = 0.2 -- starts small
beam.Width1 = 2 -- ends big

-- parent beam
beam.Enabled = true
beam.Parent = att0
		
				Copy Code
			
				Light Theme